Menus
 |
Start a new blank document. |
| Open an existing document. | |
| Close the document and all the related views. | |
| Various save methods. | |
| Export the data in a given channel as a standard wave document. (only active for multi-channel files) | |
| Save either the active window or the entire screen as bitmap picture. | |
| Load or save the application configuration. | |
| Printing the active document or the entire screen | |
| Recent files. (may not be available for Macquirer) | |
| Exit. |
 |
Undo the last editing operation. (only one level of undo operation is possible) |
| Normal editing operations. | |
| Clear the selected region to the reference value set in the Option->Display dialog. (either manually entered or through the menu) | |
| Normal selection operations. |
|
Undo the last zooming operation. |
| Zoom into the file by doubling the time scale. | |
| Zoom out by halving the time scale. | |
| Zoom into the selected area. | |
| Zoom from the marker position for the duration stated in Option->Zoom. | |
| Zoom to the original file time length. |
 |
Sets he reference level for all channels, except
acoustics, using the
value at the marker.
You can manually adjust this value in Option->Display. |
 |
Only active for multi-channel data acquisition. A scope view to see all the channel before sampling. |
| Start recording process. | |
| Play all the acoustic data channel. | |
| Play selection of the acoustic data channel. | |
| Play data shown in the current window of the acoustic data channel. |
 |
Perform FFT/LPC analysis at the marker position or on the selected region for the acoustics data channel. |
| Perform spectrogram analysis on all or selection of data or data shown on the active window for the acoustics data channel. | |
| Perform fundamental frequency extraction analysis for the acoustics data channel. | |
| Perform energy (RMS amplitude) for all data channels | |
| Perform running average smoothing over given number of points for all the data channels except the acoustic data channel. |
 |
Enter and exit label entering mode. See label operation for detail. |
| View all the current labels in an spreadsheet like data table. See label operation for detail. |
 |
Start a blank log file. |
| Open an existing log file. New data entries will be appended to the end of this file. | |
| Normal save operations. | |
| Enter data at the location of the marker. Enters data depending what window you are entering data from. | |
| Enter duration data. Enters data depending on what window you are entering from. | |
| Enter data. Selection Enters data from the main window for all the shown channels with time interval specified in Log option. | |
| Enter formants at the marker from spectrogram window. | |
| Enter formants form the selection from spectrogram window. | |
| Enter pitch and intensity values from pitch window. | |
| Enter pitch and intensity values from selection from pitch window. | |
| Enter all pitch and intensity values from pitch window. | |
| Enter formants and bandwidths form FFT/LPC window | |
| Enter the entire FFT/LPC frame data. |
See Data Logging for further details.
